Greetings From The Northland

Odin88

Odin88

Member
Hello everyone! Most would not expect it, but the nigger mayhem here in North Dakota is thriving. Mostly Somalians, if you can believe that. These days I work at a steel processing plant as a press brake operator. (Big ass 175, 135, 230 ton CInncinatti CNC machines mostly) Trying to train one of these fucking primates to operate a press brake with all the various dies you must use, how to use a micrometer to check your parts, etc. can be an odyssey unto itself. One would think that something as simple and tard-friendly as the metric system would be something that even a room temperature IQ nigger from the bowels of Africa could comprehend. Apparently not. Thankfully most of them work on the night crew and I only have to deal with their mayhem in the aftermath of their shift when I get to work at 6AM. Anyway, looking forward to all of your posts and it's great to be here.
 
ThePakMan-G

ThePakMan-G

Well-known member
Odin88 said:
Hello everyone! Most would not expect it, but the nigger mayhem here in North Dakota is thriving. Mostly Somalians, if you can believe that. These days I work at a steel processing plant as a press brake operator. (Big ass 175, 135, 230 ton CInncinatti CNC machines mostly) Trying to train one of these fucking primates to operate a press brake with all the various dies you must use, how to use a micrometer to check your parts, etc. can be an odyssey unto itself. One would think that something as simple and tard-friendly as the metric system would be something that even a room temperature IQ nigger from the bowels of Africa could comprehend. Apparently not. Thankfully most of them work on the night crew and I only have to deal with their mayhem in the aftermath of their shift when I get to work at 6AM. Anyway, looking forward to all of your posts and it's great to be here.
Click to expand...
Bless North Dakota
 
HellinDetroit

HellinDetroit

Well-known member
Odin88 said:
Hello everyone! Most would not expect it, but the nigger mayhem here in North Dakota is thriving. Mostly Somalians, if you can believe that. These days I work at a steel processing plant as a press brake operator. (Big ass 175, 135, 230 ton CInncinatti CNC machines mostly) Trying to train one of these fucking primates to operate a press brake with all the various dies you must use, how to use a micrometer to check your parts, etc. can be an odyssey unto itself. One would think that something as simple and tard-friendly as the metric system would be something that even a room temperature IQ nigger from the bowels of Africa could comprehend. Apparently not. Thankfully most of them work on the night crew and I only have to deal with their mayhem in the aftermath of their shift when I get to work at 6AM. Anyway, looking forward to all of your posts and it's great to be here.
Click to expand...
Did the feds force North Dakota to take in African niggers??? How and why did this happen??
 
sxng9

sxng9

Trustee
During my high school years, I learned AutoCAD and the school did actually have one CNC milling machine, which we've milled a part during the end of the semester. I was surprised at how so many classmates that didn't even know how to use a ruler or measure in general. I used to also work for the public and having IT knowledge as well, I sometimes filled in the role of the IT guys (rather than sending in the IT team on prem). In any case, niggers would always make up 90% of the foot traffic we get. I had niggers come up to me asking for special requests from time to time. One of them being having to have certain texts fit exactly in a certain format, and the nigger couldn't even measure, so I had to do the whole thing for the nigger. I can certainly say that for all the things I've done at that particular job, the pay wasn't worth it.

I'd assume that in your company that does CNC, knowing how to use a ruler or knowing how to measure is important. I'm surprised your company would even entertain the idea of hiring niggers, given that it should be a requirement knowing how to use a ruler and measure?

Also, I can't fathom why there's so many niggers that far up north in America either.
 
HellinDetroit

HellinDetroit

Well-known member
sxng9 said:
During my high school years, I learned AutoCAD and the school did actually have one CNC milling machine, which we've milled a part during the end of the semester. I was surprised at how so many classmates that didn't even know how to use a ruler or measure in general. I used to also work for the public and having IT knowledge as well, I sometimes filled in the role of the IT guys (rather than sending in the IT team on prem). In any case, niggers would always make up 90% of the foot traffic we get. I had niggers come up to me asking for special requests from time to time. One of them being having to have certain texts fit exactly in a certain format, and the nigger couldn't even measure, so I had to do the whole thing for the nigger. I can certainly say that for all the things I've done at that particular job, the pay wasn't worth it.

I'd assume that in your company that does CNC, knowing how to use a ruler or knowing how to measure is important. I'm surprised your company would even entertain the idea of hiring niggers, given that it should be a requirement knowing how to use a ruler and measure?

Also, I can't fathom why there's so many niggers that far up north in America either.
Click to expand...
Biden and his team of communists have been bribing areas with white majorities to diversify in the name of "equality" .
This is proof of a plan to replace the white race, it's staring us in the face right now.
It's disturbing to note that the local residents of a targeted area do not have any choice in the matter regarding this insanity.
Whites and blacks living and working together DOES NOT WORK., yet the liberals are still trying to fit that square peg into a round hole.
Oil and water do not mix, any idiot can see that.
 
zigman

zigman

Well-known member
HellinDetroit said:
Biden and his team of communists have been bribing areas with white majorities to diversify in the name of "equality" .
This is proof of a plan to replace the white race, it's staring us in the face right now.
It's disturbing to note that the local residents of a targeted area do not have any choice in the matter regarding this insanity.
Whites and blacks living and working together DOES NOT WORK., yet the liberals are still trying to fit that square peg into a round hole.
Oil and water do not mix, any idiot can see that.
Click to expand...
main-qimg-060082de19ab017631f511d711f70063
 
Fireblade

Fireblade

Riot Control
Staff member
Odin88 said:
Hello everyone! Most would not expect it, but the nigger mayhem here in North Dakota is thriving. Mostly Somalians, if you can believe that. These days I work at a steel processing plant as a press brake operator. (Big ass 175, 135, 230 ton CInncinatti CNC machines mostly) Trying to train one of these fucking primates to operate a press brake with all the various dies you must use, how to use a micrometer to check your parts, etc. can be an odyssey unto itself. One would think that something as simple and tard-friendly as the metric system would be something that even a room temperature IQ nigger from the bowels of Africa could comprehend. Apparently not. Thankfully most of them work on the night crew and I only have to deal with their mayhem in the aftermath of their shift when I get to work at 6AM. Anyway, looking forward to all of your posts and it's great to be here.
Click to expand...
Welcome! When I read "somalians" I said "Oh fuck" out loud. They have ir own unique hyper coonsentrated TNB. As for the metric system, well, it makes sense, metric goes from distances between cities to the thickness of a sheet of metal, both the vast, and the extremely fine boggles their brains.
 
cAn

cAn

Well-known member
Odin88 said:
Hello everyone! Most would not expect it, but the nigger mayhem here in North Dakota is thriving. Mostly Somalians, if you can believe that. These days I work at a steel processing plant as a press brake operator. (Big ass 175, 135, 230 ton CInncinatti CNC machines mostly) Trying to train one of these fucking primates to operate a press brake with all the various dies you must use, how to use a micrometer to check your parts, etc. can be an odyssey unto itself. One would think that something as simple and tard-friendly as the metric system would be something that even a room temperature IQ nigger from the bowels of Africa could comprehend. Apparently not. Thankfully most of them work on the night crew and I only have to deal with their mayhem in the aftermath of their shift when I get to work at 6AM. Anyway, looking forward to all of your posts and it's great to be here.
Click to expand...
As always, we're glad to have you with us!
 
Odin88

Odin88

Member
Thanks for the replies and the welcome. Yes, I was a member here many, many years ago. Been over a decade now since I was on the original Chimpout. Back then I was a cook at Analbeads, excuse me, Applebees. Dear god almighty did the primates I worked with there provide some outstanding thread material here. But about 7 years ago when I turned 40, I decided to leave that dead end bullshit behind me. Last summer when I got this excellent paying gig bending steel all day, I ran into an old co-worker from Analbeads. He told me they would hire me back in a second as they were hurting for experienced cooks. I informed him very politely that I would rather place my cock and balls on a stainless steel work bench and pound my genitals into fucking paste with a 15 pound claw hammer while having an entire turkey baster full of jalapeno juice and fire ants injected directly into my asshole before I ever debased myself by stepping foot into that greasy "McDonald's with a fuckin liquor license" shithole ever again. I think he got the point.
 
You must log in or register to reply here.
Top